Our Products

AD Board

BLA-C46DV

Features

  • Compatible from VGA up to Full HD resolution(1920x1080) TFT LCD panel.
  • Supply single pixel(24bits)or dual pixel(48bits) digital RGB output.
  • Support Vertical refresh rate up to 75Hz for VGA~SXGA+(1400x1050) and 60Hz for higher resolution of VESA Standard Timing.
  • Support VGA analog standard input signal(15-pin D-Sub connectors).
  • Automatic detection of separate synchronize and composite synchronizes of VGA.
  • Support Digital Signal input (DVI)
  • Support Digital Signal input (Display Port)
  • RS232 support(Option)
  • DC 12V input
  • RoHS compliant

Support Timing Table

Mode Resolution H Freq.(KHz) V Freq.(Hz)
1 640*350@70 31.469 70.087
2 640*480@60 31.469 59.94
3 640*480@72 37.861 72.809
4 640*480@75 37.5 75
5 720*400@70 31.469 70.087
6 800*600@56 35.156 56.25
7 800*600@60 37.879 60.317
8 800*600@72 48.077 72.188
9 800*600@75 46.875 75
10 1024*768@60 48.363 60.004
11 1024*768@70 56.476 70.069
12 1024*768@72 58.038 71.918
13 1024*768@75 60.023 75.029
14 1280*70@50 36.91 49.82
15 1280*720@60 44.62 59.81
16 1280*1024@60 63.98 60
17 1280*1024@70 74.882 69.853
18 1280*1024@75 79.976 75.025
19 1360*768@60 47.72 59.799
20 1440*900@60 55.935 59.887
21 1680*1050@60 65.3 60
22 1920*1080@50 56.25 50
23 1920*1080@60 66.6 60
Connector List
Connector Function Note
CN1 VGA connector D-15F
DP1 Display Port connector
CN4 DVI connector
CN5 Power connector ψ2.5
J5 LCD Panel for LVDS PH 2.0mm.32Pin.180°
J6 Key pad connector PH 2.0mm.10Pin.180°
J7 LED Driver connector PH 2.0mm.6Pin.90°
JP1 3.3V/5V/ 12V selector PH 2.5mm.2x3Pin.180°
JP2 PWM / Analog selector PH 2.5mm.3Pin.180°
J13 5V connector PH 2.0mm.2Pin.180°
J14 12V connector PH 2.0mm.2Pin.180°

Pin definition for connector

J7: Inverter Connector (2.0mm 8 Pin DIP)

Pin Function Note
1,2 12V Input
4,6 GND
3 Brightness control PWM
5 ON/OFF Control 5V ON;0V OFF

J6: Key Pad Connector (2.0 mm 10Pin DIP)

Pin Function Note
1 SEL+(RIGHT)
2 SEL-(LEFT)
3 AUTO
4 MENU
5 POWER
6 LED-G
7 LED-R
8 GND
9 N.C.
10 N.C.

JP1: 5V/3.3V/12V Selector (2.5 mm 2x3 Pin DIP)

Pin Description Note
1-6 3.3V
2-5 5V
3-4 12V

JP2: PWM / Analog selector (2.5 mm 3Pin DIP)

Pin Description Note
1-2 PWM
2-3 Analog

J13: 5V Connector (2.0 mm 2Pin DIP)

Pin Function Note
1 5V
2 GND

J14: 12VConnector (2.0 mm 2Pin DIP)

Pin Function Note
1 12V
2 GND

J5: Panel Connector (2.0 mm 32 Pin DIP)

Pin Name Pin Name Pin Name
1 VDD 12 RXECLKIN+ 23 RXOCLKIN-
2 VDD 13 RXEIN2- 24 RXOCLKIN+
3 VDD 14 RXEIN2+ 25 RXOIN2-
4 VDD 15 RXEIN1- 26 RXOIN2+
5 GND 16 RXEIN1+ 27 RXOIN1-
6 GND 17 RXEIN0- 28 RXOIN1+
7 GND 18 RXEIN0+ 29 RXOIN0-
8 GND 19 GND 30 RXOIN0+
9 RXEIN3- 20 GND 31 GND
10 RXEIN3+ 21 RXOIN3- 32 GND
11 RXECLKIN- 22 RXOIN3+

Board Dimension :116mm*95mm