Our Products

放大

AD Board

BLA-C46KE

Features

  • Compatible from VGA up to Full HD resolution(1920x1080) TFT LCD panel.
  • Supply single pixel(24bits)or dual pixel(48bits) digital RGB output.
  • Support Vertical refresh rate up to 75Hz for VGA~SXGA+(1400x1050) and 60Hz for higher resolution of VESA Standard Timing.
  • Support VGA analog standard input signal(15-pin D-Sub connectors).
  • Automatic detection of separate synchronize and composite synchronizes of VGA.
  • Support Digital Signal input (DVI)
  • Support external Audio Amplifier function.
  • RS232 support(Option)
  • Matching P/I power board
  • Operating temperature : 0 °C to +50 °C
  • Storage temperature : -40 °C to +60 °C
  • RoHS compliant

Support Timing Table

Mode Resolution H Freq.(KHz) V Freq.(Hz)
1 640*350@70 31.469 70.087
2 640*480@60 31.469 59.94
3 640*480@72 37.861 72.809
4 640*480@75 37.5 75
5 720*400@70 31.469 70.087
6 800*600@56 35.156 56.25
7 800*600@60 37.879 60.317
8 800*600@72 48.077 72.188
9 800*600@75 46.875 75
10 1024*768@60 48.363 60.004
11 1024*768@70 56.476 70.069
12 1024*768@72 58.038 71.918
13 1024*768@75 60.023 75.029
14 1280*70@50 36.91 49.82
15 1280*720@60 44.62 59.81
16 1280*1024@60 63.98 60
17 1280*1024@70 74.882 69.853
18 1280*1024@75 79.976 75.025
19 1360*768@60 47.72 59.799
20 1440*900@60 55.935 59.887
21 1680*1050@60 65.3 60
22 1920*1080@50 56.25 50
23 1920*1080@60 66.6 60
Connector List
Connector Function Note
CN1 VGA connector D-15F
CN2 HDMI Connector
CN3 Audio Line-in Jack ψ3.5
CN4 DVI connector
J4 Power connector PH 2.0mm. 4Pin.180°
J5 LCD Panel for LVDS PH 2.0mm.32Pin.180°
J6 Key pad connector PH 2.0mm.10Pin.180°
J7 Inverter connector PH 2.0mm.8Pin.180°
J9 UART Connector PH 2.0mm.5Pin.180°
J11 IR Connector PH 2.0mm. 3Pin.180°
J12 Ext. Amp. connector PH 2.0mm. 5Pin.180°
JP1 3.3V/5V/ 12V selector PH 2.5mm.2x3Pin.180°
JP2 PWM / Analog selector PH 2.5mm.3Pin.180°

Pin definition for connector

CN3 : Audio Line-in connector (phone jackψ3.5)
CN3

J7: Inverter Connector (2.0mm 8 Pin DIP)

Pin Function Note
1,2 12V Input
4,6 GND
3 Brightness control 0V – 5V Analog
or   PWM
5 ON/OFF Control 5V ON;0V OFF
7,8 5V Input/Output

Note :
2.0mm 5 pin connector(Pin1~5) is used for standard 12V input
And stand alone Inverter .
2.0mm 3 pin connector (Pin6~8) is used for 2-in-1 power supply with 5V input.

J6: Key Board Connector (2.0 mm 10Pin DIP)

Pin Function Note
1 SEL+(RIGHT)
2 SEL-(LEFT)
3 AUTO
4 MENU
5 POWER
6 LED-G
7 LED-R
8 GND
9 N.C.
10 N.C.

J4: Connector (2.0 mm 4Pin DIP)

Pin Description Note
1 12V
2 GND
3 GND
4 12V

J9: Connector (2.0 mm 5Pin DIP)

Pin Description Note
1 V5B
2 Key2
3 Tx
4 Rx
5 GND

J11: Connector (2.0 mm 3Pin DIP)

Pin Description Note
1 V5A
2 IR
3 GND

J12: Connector (2.0 mm 5Pin DIP)

Pin Description Note
1 L_10W
2 R_10W
3 Mute_AMP
4 STB_AMP
5 GND

JP1:Panel B+ 3.3V / 5V / 12V selector (2.5 mm 2*3Pin DIP)

Pin Description Note
1- 6 3.3V
2 - 5 5V
3 - 4 12V

JP2:PWM / Analog selector (2.5 mm 3Pin DIP)

Pin Description Note
1- 2 PWM
2 - 3 Analog

J5: Panel Connector (2.0 mm 32 Pin DIP)

Pin Name Pin Name Pin Name
1 VDD 12 RXEIN2+ 23 RXOIN1-
2 VDD 13 RXEIN1- 24 RXOIN1+
3 VDD 14 RXEIN1+ 25 RXOIN0
4 VDD 15 RXEIN0 26 RXOIN0+
5 GND 16 RXEIN0+ 27 NC
6 GND 17 RXOIN3- 28 NC
7 RXEIN3- 18 RXOIN3+ 29 NC
8 RXEIN3+ 19 RXOINC- 30 NC
9 RXEINC- 20 RXOINC+ 31 GND
10 RXEINC+ 21 RXOIN2- 32 GND
11 RXEIN2- 22 RXOIN2+

Board Dimension :113mm*95mm

回上一頁